SFP-25G-ER-I Overview
The Cisco SFP-25G-ER-I is a 25GBASE-ER SFP28 transceiver with industrial temperature support. It provides 25Gbps connectivity over standard single-mode fiber for distances up to 40km.
This module features integrated 1310nm EML transmitter and PIN photodiode receiver hardened to withstand extreme temperatures from -40°C to +85°C. It has 2.5W max power consumption.
The Cisco SFP-25G-ER-I enables long reach 25G applications in service provider, metro, and data center interconnects. It is compatible with Cisco routers and switches supporting 25G SFP28 ports.
Quick Specifications
Attribute | Value |
---|---|
Connector Type | Dual LC/PC |
Cable | 9um Single-mode Fiber |
Wavelength | 1310nm |
Reach | 40km |
Signaling Rate | 25.78Gbps |
FEC Requirement | RS-FEC |
Max Power Consumption | 1.5W |
Operating Temperature | -40°C to +85°C |
Dimensions | 56.5 x 18.35 x 9.5 mm |
SFP-25G-ER-I Features and Benefits
- 25Gbps connectivity over 40km single-mode fiber
- Industrial temperature rating from -40°C to +85°C
- Integrated 1310nm EML transmitter and PIN receiver
- Low transmit power variance for longer reaches
- QSFP pull-tab for reliable latching
- Hardened for outside plant deployments
Compatible Products
Platform | Minimum Software Version | Line Cards Supported |
---|---|---|
Cisco NCS 5500 Series Routers | IOS XE Gibraltar 16.10.1 | N55-M16PQ-SA |
Cisco Nexus 3000 Series Switches | 7.0(3)I7(7) NX-OS | N3K-C3232C |
Full Specifications
Specification | Value |
---|---|
Bit Rate | 25.78Gbps |
Fiber Cable | 9μm ITU-TG.652 SMF |
Connectors | Dual LC/PC |
Wavelength | 1310nm |
Launch Power Min/Max | -3dBm/+6dBm |
Receive Power Sensitivity | -21dBm |
Dimensions | 56.5 x 18.35 x 9.5 mm |
Diagnostic Monitoring | Yes |
Safety Standards | UL/IEC 60825 |
SFP-25G-ER-I Licensing
No licensing required. Can work with any Cisco platform supporting its form factor.
Warranty Information
Comes with 5 years warranty by default. For complete terms, contact Cisco account representative.
Installation and Configuration
It is hot-swappable. Port speed is auto-negotiated to 25Gbps. Host interfaces should enable RS-FEC.
Reviews
There are no reviews yet.