SFP-10/25G-BXD-I Overview
The Cisco SFP-10/25G-BXD-I is a 10/25GBASE-BR SFP28 transceiver supporting bidirectional transmission over a single fiber. It provides 10Gbps and 25Gbps operations for up to 10km reaches.
This industrial temperature module has integrated 1330nm DML transmitter and 1270nm PIN receiver to transmit and receive data on a single fiber strand. It supports duplex LC connectivity.
The SFP-10/25G-BXD-I features a compact SFP28 form factor and low power consumption. It is compatible with Cisco’s 10/25G bidirectional platforms for simplex fiber applications.
Quick Specifications
Attribute | Value |
---|---|
Connector Type | Single LC/PC |
Cable | 9um Single-mode Fiber |
Wavelength | Tx: 1330nm Rx: 1270nm |
Reach | 10km |
Signaling Rate | 10.3Gbps/25.78Gbps |
FEC Requirement | RS-FEC (for 25G) |
Max Power Consumption | 1.5W |
Operating Temperature | -40°C to +85°C |
Dimensions | 56.5 x 18.35 x 9.5 mm |
SFP-10/25G-BXD-I Features and Benefits
- Bidirectional 10/25Gbps transmission over single fiber
- Extended temperature range from -40°C to +85°C
- Sophisticated 1330nm DML transmitter
- Integrated 1270nm PIN photodiode receiver
- Industrial reliability and durability
- Low power dissipation under 1.5W
Compatible Products
Platform | Minimum Software Version | Line Cards Supported |
---|---|---|
Cisco Nexus 3000 Series | 7.0(3)I7(5) NX-OS | N3K-C3232C |
Cisco Catalyst 9800 Rugged Series | IOS XE Gibraltar 16.12.1 | C9800-L1021SRUK9 |
Full Specifications
Specification | Value |
---|---|
Bit Rate | 25.78/10.3Gbps |
Fiber Cable | 9μm ITU-TG.652 SMF |
Connector | Single LC/PC |
Wavelength | Tx: 1330nm Rx: 1270nm |
Launch Power Min/Max | 10G: -8.2dBm/+0.5dBm 25G: -7dBm/+2dBm |
Receive Power Sensitivity | 10G: -16.2dBm 25G: -15dBm |
Dimensions | 56.5 x 18.35 x 9.5 mm |
Diagnostic Monitoring | Yes |
Safety Standards | UL/IEC 60825 |
SFP-10/25G-BXD-I Licensing
No licensing required. Can work with any Cisco platform supporting its form factor.
Warranty Information
Comes with 5 years warranty by default. For complete warranty terms, contact Cisco account representative.
Installation and Configuration
It is hot-swappable. Port speeds are auto-negotiated. Host interfaces should enable RS-FEC for 25G operation.
Reviews
There are no reviews yet.