CWDM-SFP10G-1550 Overview
The Cisco CWDM-SFP10G-1550 is a 10 Gigabit Ethernet coarse wavelength division multiplexing (CWDM) small form-factor pluggable (SFP+) transceiver module. It operates at the 1550nm wavelength and allows transport of 10GbE signals up to 40km over standard single-mode fiber (SMF).
The CWDM-SFP10G-1550 utilizes a dual LC connector interface and plugs into any Cisco SFP+ port, providing a convenient and cost-effective solution for 10GbE links in metro, access and data center networks. Its extended reach makes it ideal for campus backbones, ISP peering and data center interconnects.
With its CWDM capability, the module enables multiplexing of up to 18 channels on a single fiber pair, delivering high capacity and scalability in fiber-constrained environments. The CWDM-SFP10G-1550 can be combined with other CWDM wavelengths for increased bandwidth per fiber strand.
Quick Specifications
Parameter | Value |
---|---|
Data Rate | 10 Gbps |
Wavelength | 1550nm |
Fiber Type | Single-mode (SMF) |
Max Distance | 40km |
Connectors | LC/PC |
Operating Temp | 0°C to 70°C |
CWDM-SFP10G-1550 Features and Benefits
- Supports 10 Gigabit Ethernet on CWDM ITU grid
- Extended reach up to 40km on SMF
- Enables up to 18 channels to be multiplexed on a fiber pair
- Hot-swappable SFP+ form factor plugs into Cisco SFP+ ports
- Low power consumption under 300mA
- Industrial temperature range
- Cost-effective CWDM wavelength for 10GbE links
Compatible Products
Product Category | Product Line |
---|---|
Switches | Cisco Catalyst 2960 Series |
Cisco Catalyst 3560 Series | |
Cisco Catalyst 3750 Series | |
Cisco Catalyst 3850 Series | |
Cisco Catalyst 4500 Series | |
Cisco Catalyst 6500 Series | |
Cisco Nexus 3000 Series | |
Cisco Nexus 5000 Series | |
Cisco Nexus 6000 Series | |
Routers | Cisco ASR 1000 Series |
Cisco ISR 4000 Series | |
Cisco MDS 9000 Series |
Full Specifications
Parameter | Value |
---|---|
Data Rate | 10.3125 Gbps |
Wavelength | 1550nm +/- 6.5nm |
Max Output Power | 5dBm |
Receiver Sensitivity | -16dBm (10GbE) -14dBm (with dispersion) |
Side Mode Suppression Ratio | >30dB |
Extinction Ratio | >8.2dB |
Max Input Power | 0dBm |
Power Consumption | <300mA |
Operating Temperature | 0°C to 70°C |
Storage Temperature | -40°C to 85°C |
Connectors | LC/PC |
Fiber Type | Single-mode fiber |
Max Distance | 40km |
Dimensions | 13.4 x 0.54 x 0.48 cm |
Weight | 0.23 lbs |
Compliance | ITU-T G.694.2, Class 1 Laser |
CWDM-SFP10G-1550 Licensing
The Cisco CWDM-SFP10G-1550 does not require any licenses for operation.
Warranty Information
The Cisco CWDM-SFP10G-1550 comes with a 1 year limited hardware warranty provided by Cisco.
Installation and Configuration
The Cisco CWDM-SFP10G-1550 can be installed in any Cisco SFP+ port. It is hot-swappable and does not require any specific configuration other than enabling the port. Optical parameters like output power are automatically configured. The SFP+ port should be connected to single-mode fiber cabling with LC connectors.
Reviews
There are no reviews yet.